Prusa Nozzle MK2 Full Metal RepRap Hotend

PAR-HWR-NOZ-312

Nuovo prodotto

All metal RepRap hot-end with a one piece design, capable of printing ABS, PLA, Polycarbonate, Nylon and others. Only available for use with 3mm filament.

Maggiori dettagli

Attenzione: Ultimi articoli in magazzino!

$65.34

Dettagli

  • Fully preassembled
  • 12V DC FAN included
  • For 3mm filament
  • No PTFE or PEEK (overheating doesn’t cause any damage to the nozzle)
  • Food safe Stainless Steel (303 A1)
  • Uses a powerful heat cartridge
  • Ready to print ABS, PLA, PC, Nylon
  • Made by designer of Prusa Mendel
  • 2 minutes installation time

Made to rule them all.
The Prusa nozzle is made from two main parts - The CORE and The HEATSINK. Both press-fitted together to achieve the best thermal contact.

The CORE
Very precisely machined and with lapped 3.15mm inside to achieve the smoothest filament feed possible making it jam proof with no possible way of filament leakage. Stainless steel design allows you to print in almost every thermoplastic available in 3mm filament e.g ABS, PLA, PET, PC, Nylon, Laywood, Laybrick and many more.

The HEATSINK
Made out of one piece of aluminium to get best thermal distribution and cooling. Combined design with Groove-mount.
Press-fitted on The CORE to achieve best thermal contact with it. Aluminium has approximately 2x bigger thermal shrinkage, that means there is no possible way of self disassembly.

The HEATER
Specially developed for this nozzle. Made in a same company and by the same person as the nozzle to achieve best compatibility. Fitted with cartridge heater and EPCOS B57560G104F NTC thermistor.
Powerful enough to heat The NOZZLE to 600°C ! (If you replace thermistor with thermocouple)

Stainless steel
Made out of one piece food safe stainless steel alloy (303 A1). Stainless steel design allows you to print from almost every thermoplastic you can get in 2.9mm filament.

Jam proof
Very precisely machined and with lapped 3.15mm inside to achieve smoothest filament feed possible and jam proof. There is no possible way of filament leakage.

Food safe
Food safe alloy has minimal impact on the filament purity, your prints would have a much higher chance to be food safe when using food safe filament.

Package Contents:
Prusa nozzle MKII
Cooling fan
Fan mount
Instruction

More info about using the nozzle at prusanozzle.org.

Made in the Czech republic, every sale supports RepRap development.

Reviews

Ancora nessuna recensione da parte degli utenti.

Write a review

Prusa Nozzle MK2 Full Metal RepRap Hotend

Prusa Nozzle MK2 Full Metal RepRap Hotend

All metal RepRap hot-end with a one piece design, capable of printing ABS, PLA, Polycarbonate, Nylon and others. Only available for use with 3mm filament.

Scarica