Kit i3 originale Prusa con LCD 1,75 millimetri

Nuovo prodotto

Prusa i3 è un disegno collaudato con decine di migliaia di utenti in tutto il mondo. Ora avete la grande opportunità di acquistarne una direttamente dall'autore Josef Průša e appoggiare cosí gli ulteriori sviluppi. Tutte le parti di questa stampante 3D sono Open Source e sono parte del progetto RepRap.

Maggiori dettagli

Questo prodotto non è più disponibile

$599.00

Dettagli

WHAT'S NEW in 1.75mm version?

Check out what is new in 1.75mm version on PrusaPrinters.org! We also added easy color 3D printing feature based on layer height, check it out here or watch the video below! 

3D printer for enthusiasts, students, schools ...

Why is Original Prusa i3 better than every clone out there? See the video ;-)

Original Prusa i3 is everywhere ;-)

Original Prusa i3 is everywhere, you can see the map of cities where we sent at-least one. Bigger map.

Prusa i3 #1 3D printer worldwide

Prusa i3 is the most used 3D printer according to 3DHubs, since January 2016.

Technical specifications (February 2016 edition)

  • Print area - 8000 cm3 (200 x 200 x 200 mm or 8 x 8 x 8 inches)
  • Open frame design for easy use
  • Integrated LCD for use without a computer
  • SD card support (8GB included) and USB port
  • Now with 1.75mm E3D hotend and improved performance
  • Easy multicolor printing
  • Layer height from 0,05 mm
  • Heated print bed for warpless 3D printing from any material
  • Maximal speed of 200 mm/s
  • Supported materials - PLA, ABS, PET, HIPS, Flex PP, Ninjaflex, Laywood, Laybrick, Nylon, Bamboofill, Bronzefill, ASA, T-Glase, Carbon-fibers enhanced filaments...
  • Step size in X/Y axes - 10 micron
  • 1 kg (2 lbs) PLA filament included 
  • Average power consumption 50 W (printing PLA) or 90 W (printing ABS), exterior dimensions 42 x 42 x 38 cm (16.5 x 16.5 x 15 inches), weight 6,5 kg (14 lbs), CE certification
  • Specially optimized firmware for quiet printing

THE MORE MATERIALS YOU PRINT, THE MORE OF A PRINTER YOU ARE!

and many more, we constantly add new materials! Send us tips for materials you would love to see supported :) Buddha statues were printed with our DETAIL print settings (100 µm layer height) and 60 mm tall. Full resolution image.

Compare our bundled print presets vs the print time

Great support

We are an established company and we work hard to help you start 3D printing as soon as possible. You are not left alone in the big world of 3D printing!

The kit comes along with a forum support where our ever growing community can always help or you can even get in touch with Jo Prusa himself at the very same spot! Check out the forum!

With 3D printing, buying a printer is just a beginning!


No fakes!

In our kit you won't find a fake Arduino clone and cheap outdated RAMPS electronics where you have to change connectors and parts to achieve smooth printing.

We only use original parts. For example our RAMBo mini electronics is manufactured directly by Ultimachine (Authors of RAMPS and RAMBo) in USA. Not only that you support the developer but you also get the best possible quality. Real MOLEX connectors, great caps and testing assures longevity.

After all, there is only one original Prusa i3 too.


Best assembly instructions and free 3D Printing handbook

We didn't want to leave anything to chance, so our assembly instructions are pictured to the smallest detail.

See the assembly manual for yourself!

All fasteners and mechanical parts have 1:1 drawing so you can easily find them and there is no chance of you picking a wrong one. You don't have to be MIT graduate to assemble our kit ;-)

Our fastest customer built the kit in 4 hours! Will you beat him?


No soldering

You don't have to solder at all to build our kit. You don't even have to own a soldering iron. All our cables are cut to length and with professionally crimped connectors.

From the electronics standpoint the hardest thing will be plugging the connectors to the mother board ;-)

This makes the kit very friendly to younger builders :-)


Tools included

Our package includes everything! And we really mean it, you will get even all the tools needed for assembly. We don't expect you to have a fully featured workshop or force you run to the hardware store.

Included tools:

  • Needle nose pliers
  • 2× Wrench 13-17
  • Flat screwdriver
  • Set of hex keys

Ready to print settings

We provide great print settings with the printer so you don't have to dive into complex new programs the second you finish the build. You can start printing right away and this gives you a great head start!

These settings are great for all kinds of objects, not just for a couple of prepared show pieces. After you will get to know the printer you can of course dive into tinkering ;-)

Supported software:

  • Slic3r
  • Simplify3D
  • KISSlicer
  • Cura 

Scheda tecnica

stampanti 3D

Reviews

Ancora nessuna recensione da parte degli utenti.

Write a review

Kit i3 originale Prusa con LCD 1,75 millimetri

Kit i3 originale Prusa con LCD 1,75 millimetri

Prusa i3 è un disegno collaudato con decine di migliaia di utenti in tutto il mondo. Ora avete la grande opportunità di acquistarne una direttamente dall'autore Josef Průša e appoggiare cosí gli ulteriori sviluppi. Tutte le parti di questa stampante 3D sono Open Source e sono parte del progetto RepRap.