Linear MISUMI bearing LMU8
Timing pulley T16-2GT
Bearing housing 623h
Linear bearing LM8UU
This product is the replacement hotend PTFE tube. It is ONLY compatible with the MK3S+ and MK3S+ with MMU2S hotends. It is NOT compatible with the MK2.5, MK3, MK3S hotends.
PEI-Ultem sheet (MK2/S, MK2.5/S, MK3/S/+, MINI/+) This product is the replacement PEI-Ultem sheet. This is NOT the Spring steel sheet with smooth double-sided PEI.
Bondtech drivegear (set)
This product is the replacement Molex connector for hotend heater cartridge cables, heatbed heater cables, and PSU cables.
This product is the replacement PSU to Einsy power cable. It is ONLY compatible with the black housing PSU.
This product is the replacement PSU to Einsy power panic cable. It is ONLY compatible with the black housing PSU.
Timing belt 2GT X-axis
Timing belt 2GT Y-axis
This product is the replacement Heatsink collet E3D for the Hotend heatsink E3D.
SuperPINDA replaces the P.I.N.D.A. V2 (MK3/S, MK2.5/S) and M.I.N.D.A. (MINI). When replacing the original probe with SuperPINDA make sure to use the 3.9.2 or higher firmware version. SuperPINDA is temperature-independent, with higher quality sensor, and doesn't need a thermistor. Making the first layer calibration and mesh bed leveling much easier and...
This product is the replacement power supply unit ONLY. It does NOT come with any cables. The PSU-Einsy power cable and the PSU-Einsy power panic cable are available separately. You can also get the complete PSU 24V 240W set with the cables included.
This product is the replacement Print fan. It is compatible with the Original Prusa i3 MK3/S/+ and MINI/+.
This product is the replacement Hotend fan Noctua. It is ONLY compatible with the MK3/S/+. The MK2.5/S Rambo requires the v-cable adapter, the fan can NOT be connected to the MK2.5/S Rambo directly.
MK3S+ Fasteners (spare bag)
This product is the replacement IR filament sensor. It is ONLY compatible with the MK2.5S and MK3S/MK3S+. It is NOT compatible with the MK2.5 and MK3.