Original Prusa i3 MK3S 3D printer

The Original Prusa I3 MK3S is the successor of the award-winning Original Prusa i3 MK2 3D printer. With the rebuilt extruder, a plethora of sensors and the new magnetic MK52 heatbed with replaceable PEI spring steel print sheet we believe that we've developed our best 3D printer yet!  

This is a fully assembled printer. If you're looking for DIY KIT, you can find it here.

More details

The lead time is 3-4 weeks. Check out the shipping table.



$999.00

  No VAT

Add to wishlist

More info

After more than a year of a continuous development of the Original Prusa i3 MK3 we are introducing MK3S - the enhanced and improved revision of the MK3.

WITH THE ORIGINAL PRUSA i3 MK3S WE ARE INTRODUCING:

NEW FILAMENT SENSOR

The previous sensor didn’t work well with some specific filaments. The new sensor is using the optical sensor which is triggered by a simple mechanical lever. This sensor doesn’t care about the optical properties of the filament and cannot die because of mechanical wear.

BETTER SERVICE & PRINTS

Thanks to completely reworked extruder changing the nozzle or PTFE tube is easier than ever before. As a bonus, the nozzle and the extruder motor is much closer to the X axis, this means less resonance and better prints too. MK3S is also better for printing from flexible materials.

DOZENS OF TWEAKS

MK3S includes all the cumulative upgrades from the entire life cycle of the MK3 like genuine Gates belts, textile sleeves, a new Einsy case for easier Raspberry Pi connection, an anti-rust coating on smooth PEI sheets and, of course, dozens of firmware and plastic parts enhancements.


The Original Prusa i3 MK3/S is the "Best 3D printer" according to All3DP.com and MAKE: Magazine, where MK3/S also received "Editor's Choice" as the highest-rated 3D printer in 2019 Digital Fabrication Guide. The MK3S features a rebuilt extruder, numerous sensors, and various smart features. Plus, a new magnetic MK52 heatbed with replaceable PEI spring steel print sheet. Dozens of various tweaks and upgrades improve the reliability and ease of use. MK3S‘s functionality can be further expanded with the unique Multi-Material Upgrade 2S addon for printing with up to 5 materials simultaneously. Below, you can see some of the many 3D printer awards Prusa Research received.


WHAT WE ARE PROUD OF...

The most significant features of Original Prusa i3 MK3S

REMOVABLE HEATBED

The new MK52 Magnetic Heatbed holds a replaceable alloy spring steel sheet with a PEI surface. You can choose between two types of sheets - smooth PEI sheet (default option) and textured powder coated PEI

FRAME STABILITY

With the MK3S we are introducing the reworked Y axis from aluminum extrusion. It provides the same rigidity as some other printers while providing the sleek look of our milled Dural frame. The frame is also optimized to add 10 mm of Z height totaling at 210 mm.

SILENT & FASTER PRINTING

Thanks to the new Trinamic2130 drivers and Noctua fan, the MK3S is extremely quiet in the stealth mode. But the MK3S is quieter than 99 % of the available printers, even in the Normal mode. In normal mode, we have also increased the travel speed. Now you can achieve up to 200 mm/s!

POWER PANIC

Have you ever tripped over the extension cord and lost a 20-hours print? MK3S will save you! The printer can fully recover from the loss of power. It detects power interruption and shuts down the heatbed and extruder heating. After restoring the power, you can continue with printing.

FILAMENT SENSOR

With MK3S we are introducing a completely reworked extruder with a new filament sensor. The new sensor is using the optical sensor which is triggered by a simple mechanical lever. This sensor doesn’t care about the optical properties of the filament (it can be completely invisible) and cannot die because of mechanical wear.

PREVENTS SHIFTED LAYERS

The new EINSY RAMBo motherboard with Trinamic drivers not only makes the MK3S silent but it also can detect skipped steps and layer shifting. This is a big step forward in the reliability of the printer and the user comfort. You can say goodbye to ugly prints!

BONDTECH EXTRUDER

The extruder has now upgraded with Bondtech drive gear. It grips the filament from both sides, increasing the push force and making the printer more reliable. This is useful especially for flexible filaments. Also, the print fan now cools part from two sides, increasing the overall performance.

P.I.N.D.A. 2 PROBE

MK3S has two new thermistors. The first one measures ambient temperature on the electronics, preventing MINTEMP errors in rooms with 15°C or less. The second one is embedded in the new P.I.N.D.A. 2 probe to compensate for temperature drift. So the first layer will always be spot on!

E3D V6 NOZZLE

E3D V6 is market-leading all metal hotend well known for its high-temperature performance. The MK3S utilizes a custom heatbreak developed together with E3D. The reliability has proved in our Multi Material upgrade and continues to deliver great performance in surprisingly small form factor.

Read more about features of our brand new Original Prusa i3 MK3S in the article at PrusaPrinters.org


Check out the official announcement video!


THE INTERNET ABOUT MK3/S


FORBES: THE BEST 3-D PRINTERS OF 2019

"Designers that rely on 3-D printing as part of their livelihood use Prusa printers to turn out consistent, quality results. These kits contain expertly chosen parts, with an eye on recent technological upgrades.” Read more...

ALL3DP MK3S REVIEW

"We tested it using its default settings and found it extremely capable. Its print quality is truly exceptional and it’s an easy-to-use, straightforward machine.” Read more...

TECHRADAR REVIEW

"If you're looking for your first 3D printer, you like to tinker, or you run a business and want a good reliable machine then look no further than the Original Prusa i3 MK3S.” Read more...

WINDOWS CENTRAL REVIEW

"The team at Prusa Research have made something special with the MK3. If you only ever own one printer, make it this one. Of course, once you buy it you will want more of them, and that's ok too.” Read more...

CHIP (DE) REVIEW

"As the test shows, the Prusa Research Original Prusa i3 MK3S did a lot right. It is well processed, has many great features and the printing costs are very low. Especially the print quality is excellent.” Read more...

HACKSPACE UK REVIEW

"You can get under the hood and tinker with this or change that, but you don’t have to. MK3S is a printer that ‘just works’ for beginners, yet is still powerful enough for advanced use. 10/10” Read more...

3D MAKER NOOB MK3 REVIEW

"In short. What I don't like about this printer? The rubber feet. What I like? Absolutely everything else!” Watch the video...

ALL3DP MK3 REVIEW

"Using this 3D printer has been a joy and an education. (...) The Original Prusa i3 MK3 is highly, thoroughly, and unreservedly recommended.” Read more...

MAKE: MAGAZINE MK3 QUICK LOOK

"This has a lot of really exciting features that are pushing what the industry is going to be doing.” Watch the video...

THOMAS SANLADERER: MK3 REVIEW

"MK3 - highly recommended. I'm really looking forward to everything this printer does becoming standard everywhere.” Watch the video...

GREATSCOTT!: MK3 REVIEW

"With it's combination of useful new features, along with the reliability and quality of the prints, this is a 3D printer that, especially in the kit form, offers a great price-performance ratio.” Watch the video...

3D PRINTING NERD - MK3 UNBOXING / 3D PRINTING / FIRST IMPRESSIONS

"Josef Prusa and Prusa Research sent over a fully assembled Prusa i3 mk3 3d printer for me to test out and show off on the channel.” Watch the video...

MAKER'S MUSE: MK3 REVIEW

"The smarts, the removable print surface and dependable quality make it perfect for design and prototyping.” Watch the video...

3D INSIDER: MK3 REVIEW

"It is without a doubt the best 3D printer under $1,000 (...) It offers outstanding quality for a reasonable price and comes with a truckload of features.” Read more...


FULL FEATURES LIST (JUNE 2020 EDITION)

NEW FEATURES

  • Removable magnetic spring steel sheet with PEI surface (*)
  • Brand new EINSY RAMBo motherboard
  • Silent Trinamic drivers with 256 microstepping
  • Maximum travel speed up to 200 mm/s
  • Sensorless homing for X and Y axes
  • Detection and recovery of shifted layers
  • Improved frame rigidity with aluminum extrusions
  • Power loss detection and recovery
  • Better cooling from both sides of the object
  • Optional WIFI with Octoprint interface
  • Bondtech extruder drive - filament is driven from both sides
  • IR filament sensor
  • Automatic loading of filament when filament is inserted
  • Both extruder cooling fan and print cooling fan detect RPM. When extruder fan is blocked, the printer will stop to prevent damage of extruder. The same applies for the print cooling fan.
  • Extra silent Noctua fan
  • New P.I.N.D.A. 2 probe with included thermistor - faster temperature calibration

* Consumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.

BASIC FEATURES

  • Great build volume11,025 cm3 (25 x 21 x 21 cm or 9,84 x 8,3 x 8,3 in) (X×Y×Z)
  • Integrated LCD and SD card controller (8GB included)
  • 0.4mm nozzle (easily changeable) for 1.75 mm filament
  • Layer height from 0.05 mm
  • Automatic mesh bed leveling
  • Heatbed with cold corners compensation – for warpless 3D printing from any material
  • Automatic skew axes compensation
  • Hassle free PEI print surface - no glass, no glue, no ABS juice
  • Supported materials – PLA, ABS, PET, HIPS, Flex PP, Ninjaflex, Laywood, Laybrick, Nylon, Bamboofill, Bronzefill, ASA, T-Glase, Carbon-fibers enhanced filaments, Polycarbonates...
  • Easy multicolor printing based on layer height
  • 1 kg (2 lbs) silver PLA filament included
  • Kit box dimensions: 11 kg, 42×43×24 cm; 16.5×16.9×9.5 in (D×H×W)
  • Assembled printer box dimensions: 11 kg, 52×48×54 cm; 20.5×18.9×21 in (D×H×W)
  • Printer dimensions (without spool): 7 kg, 55×40×50 cm; 21.6x15.7x19.6 in (D×H×W)
  • Power consumption: PLA settings: 80W / ABS settings: 120W

WHY DO YOU WANT ORIGINAL PRUSA I3 MK3S?

Great support

We are an established company founded in 2012, and we work hard to help you start 3D printing as soon as possible. We are providing full 24/7 customer support with live chat and e-mail in several languages. There are also unofficial user groups on Facebook, where makers help each other. You will never be alone in the big world of 3D printing!

The MK3S comes along with a forum support where our ever-growing community can always help, or you can even get in touch with Jo Prusa himself at the very same spot! Check out the forum and regularly updated Knowledge Base!

With 3D printing, buying a printer is just a beginning!


Best assembly instructions and free 3D Printing handbook

We didn't want to leave anything to chance, so our assembly instructions are pictured to the smallest detail.

See the assembly manual for yourself!

All fasteners and mechanical parts have 1:1 drawing so you can easily find them, and there is no chance of you picking a wrong one. You don't have to be MIT graduate to assemble our kit ;-)

Our fastest customer built the kit in 4 hours! Will you beat him?


Ready to print settings

We provide high print settings with the printer, so you don't have to dive into complex new programs the second you finish the build. You can start printing right away, and this gives you a great head start!

These settings are great for all kinds of objects, not just for a couple of prepared showpieces. After a while, when you're familiar with the printer, you can, of course, dive into tinkering ;-)

We are developing our own slicing software. PrusaSlicer is a feature-rich, frequently updated tool that contains everything you need to export the perfect print files for your Original Prusa 3D printer. But of course, we also have the settings for the third party slicers like Simplify3D, Cura, etc.


Upgradability

One of the most popular features of Original Prusa i3 concept is upgradability. If you buy our 3D printer, you can upgrade it later to the new version, so you don't need to buy the whole new model every two years as you get used to for example with your phone or laptop. :-)

Upgrades are a great way not only for saving money, but also to learn about the construction of the printer's hardware. We are constantly improving our technology. A few years ago there was the Original Prusa i3 3mm which was upgradable to the Original Prusa i3 Plus 1.75mm (MK1). MK1 printer can become MK2S thanks to the next big upgrade and then you can go even for the latest MK3S (or MK2.5S if you wish).


Discount program for Original Prusa i3 assembled printer owners

Our discount program for the Original Prusa i3 assembled printer owners gives you a 10% discount on subsequent orders of the Original Prusa i3 assembled printers and selected filaments.

How does it work?

To enter the discount program, you only need to purchase your first Original Prusa i3 assembled printer for the full price. After the assembled printer is delivered to you, your Prusa account automatically applies the 10% discount on the assembled i3 printers. So your next assembled i3 printer will be discounted by 10% :-). Make sure to be always logged into your Prusa account, to have the discount applied.

Along, with the discount on the assembled i3 printers, the discount does apply to selected filaments too. Most importantly including our high-precision filament, the Prusament!


Ready for the Multi Material Upgrade 2S

Original Prusa i3 MK3S Multi Material 2S is the unique consumer option to print with up to 5 different materials simultaneously. MMU2S comes with a redesigned body and a new filament loading mechanism. Instead of the previous Bowden system. The motorized selector head has a F.I.N.D.A filament sensor and a built-in blade, which prevents filament jamming.

Multi-material could be your next step in the 3D printing world and MK3S is completely ready for the upgrade.

BTW: Do you know, that you can easily print soluble interface supports with Multi Material upgrade? We have a pretty smart solution for you - check out the video!


Quality guaranteed by Josef Prusa & Prusa Research

Prusa Research is a 3D printing company based in Prague, Czech Republic. It was founded by Josef Prusa, one of the core developers of the Open Source project RepRap, in 2012 as a one-man startup and grows to a 160+ team now.

The open-sourced Prusa i3 design is according to 3DHubs the most used 3D printer in the world.

Today we are shipping more than 6000 Original Prusa i3 printers per month to over 120 countries directly from Prague.


Original Prusa i3 MK3S Original Prusa i3 MK2S Original Prusa i3 MK3S Multi Material Upgrade 2S

Build volume

25 x 21 x 21 cm | 9.84 x 8.3 x 8.3 in25 x 21 x 20 cm | 9.84 x 8.3 x 825 x 21 x 21 cm | 9.84 x 8.3 x 8.3 in

Layer height

0.05 – 0.35 mm0.05 – 0.35 mm0.15 – 0.35 mm

Max travel speed

200+ mm/s100 mm/s200+ mm/s

Max hotend/heatbed temp.

300 °C / 120 °C (572 °F / 248 °F)300 °C / 120 °C (572 °F / 248 °F)300 °C / 120 °C (572 °F / 248 °F)

Print surface

removable magnetic heatbed /
PEI spring steel sheets

heated with cold corners compensation /
PEI hassle free

removable magnetic heatbed /
PEI spring steel sheets

Number of materials (simultaneously)

115

Supported materials

Any thermoplastic including Nylon and Polycarbonate

Any thermoplastic including Nylon and Polycarbonate

Any thermoplastic including soluble supports - PVA, BVOH...

Special features

Bondtech gears, Noctua fan,
extra silent Trinamic drivers

-

Direct drive extruder, filament cutter, reduced wipe tower - wipe into infill/object, manual controls, finishing filament scraps

Filament sensor

Yes (IR)

No

Yes (mechanical)

Power panic

Yes

No

Yes

Octoprint compatibility

Yes

Yes

Yes

Advanced sensors

4 thermistors, fans sensor,
shifted layers

2 thermistors

4 thermistors, fans sensor,
shifted layers

Calibration

automatic 9 points XYZ / skew axes compensation

automatic 9 points XYZ / skew axes compensation

automatic 9 points XYZ / skew axes compensation

Kit price

769€ VAT incl. or $749

619€ VAT incl. or $599

299 € VAT incl. or $299

Assembled printer price

999€ VAT incl. or $999

919€ VAT incl. or $899

-

E-shop link

Reviews

Grade 
08/31/2020

Amazing printer

Good job Prusa employees.
This printer is a masterpiece!

  • 1 out of 1 people found this review useful.
Grade 
07/14/2020

Best Printer for the dollar

I have used a lot of commercial and home printers. This printer is great and just always works. Rarely have I had a failed print. My only complaint is the printer started to make some noise, think it is a Bushing, but hasn't impacted performance. Would highly recommend.

  • 1 out of 1 people found this review useful.
Grade 
03/24/2020

Prusa is Super...Almost

Good quality, fast and almost perfect. Almost because this model don' t have 1 verry important sensor. When nozzle is glued, printer don't stop automaticly. 16 hours printed job gone to waste

  • 2 out of 5 people found this review useful.
Grade 
03/09/2020

Jeff S

The best printer on the market, You can buy the chineese knock off for less money ,but not the same ,sold all 7 of my other E3 printers and bought these instead, Thanks Josef Prusa for making the best and easiest printers to own

  • 5 out of 7 people found this review useful.
Grade 
02/23/2020

Top purchase

I can only confirm what "Tyler P" wrote. You get a great tool for the money, including support.
Keep it up.

  • 6 out of 8 people found this review useful.
Grade 
01/16/2020

1,000 STARS

This printer is fantastic. I've heard horror stories of my friends buying printers. They always had to scrape, glue, adjust, tape... blah. Prusa? Just dial in your filament and GOOOOOOOOOOOOO!! I personally would recommend the DIY kit if you have the time because you will understand your printer a little better. It's totally not neccessary though. I've used this to print stuff for my Arduino projects and even mounts for a custom radiator/transmission setup in my RX-8. The possibilites are limitless and your imagination is the limit with this machine. Plus you can print hardcore stuff like NylonX with relatively easy mods. Seriously. Don't cheap out and get something nice. Get this. Do it. Now.

  • 8 out of 9 people found this review useful.
Grade 
08/05/2019

More tool than toy

I have a Original Prusa I3MK3 for a year now. 2 more I just odered because of the new model I3MK3S and my demand on prints. With more printers I can print slower for better Quality. One is Equipped with e ruby nozzle for the abrasive filaments. I am still super happy with I3 printers. True I would love to have a bigger one also for larger obbjects to print. That would save a lot of gluing time and better Quality after all.

  • 9 out of 10 people found this review useful.
Grade 
05/17/2019

There Can only Be One ( Prusa ) MK3

Total Filament 7055.16 M
Total Print Time 189 Days 1 hour 29 mins.

Prints like the First day.

You Have just joined a family that cares, wants to help you & support you with your Printer. Support is like no other.

No Fuss or Fiddling. Very Happy with Support & Would Buy Another. Also Have CR-10S its half the speed of a Prusa at its best. but have to always fiddle or upgrade, Something is always out of whack. They don't even Compare, Except they are both 3D printers.

  • 19 out of 21 people found this review useful.
Grade 
04/29/2019

Best Printer Purchase Possible

I have used my Mk3 since March '18 and now have over 4,000 hours into the original and pushing 250 hours with the new MMU2S. It is almost creepy how well this machine works and how reliable it is with minimal maintenance. I would challenge anyone to find a better printer with half the capability anywhere! Worth every bit the wait!

  • 4 out of 5 people found this review useful.
Grade 
04/26/2019

Best Service in Any Industry

I adore the customer service. They are clearly very well trained and have always been patient and helpful in teaching me about many aspects of 3D printing. I've also never seen any other companies offer physical hardware upgrades to clients who who have the legacy model. Clearly Prusa innovates on hardware, software, and even in client service!

  • 13 out of 15 people found this review useful.

Write a review

Original Prusa i3 MK3S 3D printer

Original Prusa i3 MK3S 3D printer

The Original Prusa I3 MK3S is the successor of the award-winning Original Prusa i3 MK2 3D printer. With the rebuilt extruder, a plethora of sensors and the new magnetic MK52 heatbed with replaceable PEI spring steel print sheet we believe that we've developed our best 3D printer yet!  

This is a fully assembled printer. If you're looking for DIY KIT, you can find it here.

Download