Original Prusa i3 MK2S kit

New product

The Original Prusa i3 MK2S is one of the most popular 3D printers worldwide. Thanks to the great features like the heatbed with cold corners compensation, hassle-free PEI surface and support of wide range of materials, MK2S is the 3D Printer of the Year 2017 and 2018 in MAKE: Magazine.

This fully assembled printer is not available for order anymore. Anyway, you can by our recent and improved Original Prusa MK3s kit.

More details

In Stock

Add to wishlist

More info

The Original Prusa I3 MK2S is the winner of the 3D Printer Shootout 2017 and 2018 in prestigious MAKE: Magazine and for more than a year, it's the best desktop 3D printer according to 3Dhubs.com Trends. MK2S is also The Best 3D Printer for 2018 in "Workhorse" category on 3DHubs.com Guide with score 9.3 (the highest rated printer overall).

Original Prusa i3 is everywhere ;-)

Original Prusa i3 is everywhere, you can see the map of cities where we sent at-least one. Every dot=one ZIP code with one or more MK2s. Bigger map.

We're the highest rated on 3DHubs.com!

Prusa i3 is the most used 3D printer according to 3DHubs, since January 2016, and Original Prusa i3 MK2 is the highest rated 3d printer since Q3 2016 (FOUR quarters in a row!). Check out full stats for Q4 2017 at www.3dhubs.com/trends.


  • 31% bigger build volume - 10,500 cm3 (25 x 21 x 20 cm or 9.84 x 8.3 x 8 in)
  • Open frame design for easy use
  • Integrated LCD and SD card controller (8GB included)
  • Up to 40% faster printing thanks to the genuine E3D V6 Full hotend
  • 0.4mm nozzle (easily changeable) for 1.75 mm filament
  • Layer height from 50 microns
  • Automatic mesh bed levelling
  • Automatic skew axes compensation
  • Heatbed with cold corners compensation - for warpless 3D printing from any material
  • Hassle free PEI print surface - no glass, no glue, no ABS juice
  • Supported materials – PLA, ABS, PET, HIPS, Flex PP, Ninjaflex, Laywood, Laybrick, Nylon, Bamboofill, Bronzefill, ASA, T-Glase, Carbon-fibers enhanced filaments, Polycarbonates...
  • Easy multicolor printing
  • 1 kg (2 lbs) Silver PLA filament included
  • Average power consumption 70 W (printing PLA) or 100 W (printing ABS), exterior dimensions 42 x 42 x 38 cm (16.5 x 16.5 x 15 inches), weight 6,5 kg (14 lbs), CE certification
  • Specially optimized firmware for quiet printing



...and many more, we constantly add new materials! Send us tips for materials you would love to see supported :) Buddha statues were printed with our DETAIL print settings (100 µm layer height) and 60 mm tall. Full resolution image.


Compare our bundled print presets vs the print time


Thomas Sanladerer review

"This is absolutely the best goddamn 3D printer on the market right now.”

Bob Clagett (I Like To Make Stuff) review

“The quality is as good as Ultimaker2”

3D Printing Nerd review

Original Prusa i3 MK2 is the best printer on the market for your money! Beware of a marching army of 60 polycarbonate printed Pikachus! 

Richard Horne (RichRap) review

“Many people are recommending this as a ‘great first 3D printer’. I would go further than that. It’s simply a great and very capable 3D Printer for a good price.”

Nerdly review

“With the kit, you get the tremendous amount of value.”

Make: Magazine's review

Best 3D Printer for 2017: Prusa i3 MK2 - read full review at Makezine.com


Great support

We are an established company founded in 2012, and we work hard to help you start 3D printing as soon as possible. We are providing full 24/7 customer support with live chat and e-mail in several languages. There are also unofficial user groups on Facebook, where makers help each other. You will never be alone in the big world of 3D printing!

The kit comes along with a forum support where our ever growing community can always help, or you can even get in touch with Jo Prusa himself at the very same spot! Check out the forum and regularly updated Knowledge Base!

With 3D printing, buying a printer is just a beginning!

Fun to assemble

Assembling the kit is an excellent first step to the world of 3D printing. You will understand the principles of printer construction and get a huge advantage when you need to solve possible problems and replacements later.

But don't worry. Assembling is quite easy! You don't have to solder at all to build our kit. You don't even have to own a soldering iron. All our cables are cut to length and with professionally crimped connectors. And from the electronics standpoint, the hardest thing will be plugging the connectors to the motherboard.

All of this makes the kit very friendly to younger builders :-)

Best assembly instructions and free 3D Printing handbook

We didn't want to leave anything to chance, so our assembly instructions are pictured to the smallest detail.

See the assembly manual for yourself!

All fasteners and mechanical parts have 1:1 drawing so you can easily find them, and there is no chance of you picking a wrong one. You don't have to be MIT graduate to assemble our kit ;-)

Our fastest customer built the kit in 4 hours! Will you beat him?

Ready to print settings

We provide high print settings with the printer, so you don't have to dive into complex new programs the second you finish the build. You can start printing right away, and this gives you a great head start!

These settings are great for all kinds of objects, not just for a couple of prepared showpieces. After a while, when you're familiar with the printer, you can, of course, dive into tinkering ;-)

We are developing our own slicing software. PrusaSlicer is a feature-rich, frequently updated tool that contains everything you need to export the perfect print files for your Original Prusa 3D printer. But of course, we also have the settings for the third party slicers like Simplify3D, Cura, etc.


One of the most popular features of Original Prusa i3 concept is upgradability. If you buy our 3D printer, you can upgrade it later to the new version, so you don't need to buy the whole new model every two years as you get used to for example with your phone or laptop. :-)

Upgrades are a great way not only for saving money, but also to learn about the construction of the printer's hardware. We are constantly improving our technology. A few years ago there was the Original Prusa i3 3mm which was upgradable to the Original Prusa i3 Plus 1.75mm (MK1). MK1 printer can become MK2S thanks to the next big upgrade and then you can go even for the latest MK3S (or MK2.5S if you wish).

Quality guaranteed by Josef Prusa & Prusa Research

Prusa Research is a 3D printing company based in Prague, Czech Republic. It was founded by Josef Prusa, one of the core developers of the Open Source project RepRap, in 2012 as a one-man startup and grows to a 160+ team now.

The open-sourced Prusa i3 design is according to 3DHubs the most used 3D printer in the world.

Today we are shipping more than 6000 Original Prusa i3 printers per month to over 120 countries directly from Prague.

Original Prusa MK3 Original Prusa MK2S

Build volume

25 x 21 x 21 cm | 9.84 x 8.3 x 8.3 in25 x 21 x 20 cm | 9.84 x 8.3 x 8 in

Layer height

0.05 – 0.35 mm0.05 – 0.35 mm


200+ mm/s100 mm/s

Print surface

removable magnetic heatbed /
3 types of PEI spring steel sheets

heated with cold corners compensation /
PEI hassle free

Number of extruders


Supported materials

Any thermoplastic including Nylon and Polycarbonate

Any thermoplastic including Nylon and Polycarbonate

Special features

Bondtech gears, Noctua fan,
extra silent Trinamic drivers


Filament sensor



Power panic



Octoprint compatibility



Advanced sensors

4 thermistors, fans sensor,
jammed extruder, shifted layers

2 thermistors


automatic 9 points XYZ / skew axes compensation

automatic 9 points XYZ / skew axes compensation

Kit price


Assembled printer price


E-shop link

Data sheet

3D printersMK2S kit



Amazing Value

This product is everything it was advertised to be. Preparation and shipping were quick and the printer arrived 4 days after I ordered it. The instructions for the build were laid out very clearly and concisely leading to smooth build process(took me around 10 hours to build the printer and around 1 hour to calibrate it). After building the machine it printed very well with no problems. I would definitely recommend this kit to anyone who is just getting into 3D printing as it does a great job of teaching how it works. Overall an amazing deal to get such precision and versatility for a reasonable price.

  • 1 out of 1 people found this review useful.
  • 1

Write a review

Original Prusa i3 MK2S kit

Original Prusa i3 MK2S kit

The Original Prusa i3 MK2S is one of the most popular 3D printers worldwide. Thanks to the great features like the heatbed with cold corners compensation, hassle-free PEI surface and support of wide range of materials, MK2S is the 3D Printer of the Year 2017 and 2018 in MAKE: Magazine.

This fully assembled printer is not available for order anymore. Anyway, you can by our recent and improved Original Prusa MK3s kit.