Original Prusa MINI

Introducing our new compact 3D printer with all the bells and whistles you would expect from the creators of the award-winning Original Prusa i3 MK2 and MK3S! The MINI is a big printer in a compact body. We did our best to squeeze as many features into the lowest possible price as possible. The MINI is great for beginners, companies looking to build a printing farm and 3D printing enthusiasts worldwide.

SMART - STARTER PRINTER

AFFORDABLE - SECONDARY PRINTER

RELIABLE - PRINT FARM WORKHORSE

Save on Prusament shipping costs! Select one Prusament of your choice in the configuration menu on the right side on this page. We will add the Prusament directly to the Original Prusa MINI box and the shipping cost stays the same as for the MINI on its own.

More details

New orders have a leadtime of 8 weeks. Check out the shipping table.



$349.00

  No VAT

Add to wishlist

More info

ORIGINAL PRUSA MINI

SMART AND COMPACT 3D PRINTER FOR EVERYONE!

Original Prusa MINI - smart and compact 3D printing workhorse with all the bells and whistles you’re accustomed to when you buy an Original Prusa 3D printer. MINI will surprise you. :-) It has a print volume of 18 cm (7”) cubed, removable spring steel sheets, ethernet and optional Wi-Fi and it’s based on our brand new custom-made 32-bit Buddy mainboard with silent 2209 Trinamic drivers. And we pushed the price under 350 USD / 380 EUR (VAT incl.)!


ORIGINAL PRUSA MINI FEATURES

The most significant features of Original Prusa MINI

BUILD VOLUME

Featuring a 7"×7"×7" (18×18×18 cm) build volume, the MINI is a fully-equipped 3D printer. Featuring sensorless homing, automatic Mesh Bed Calibration, replaceable nozzles, network connectivity, USB printing and a full-color LCD screen, the MINI is a big printer in a small body.

COLOR LCD SCREEN

Configure your 3D printer with ease and see previews of sliced models before you start printing! Thanks to the 2.8’’, 240×320 LCD screen with 65.000 colors, every option is just a few clicks away.

NETWORK CONNECTIVITY

The MINI comes standard with an ethernet RJ45 port and optional future ESP Wi-Fi module upgrade. Send files to the printer wirelessly, or download OTA firmware updates. Thanks to the future updates you will be able to manage a whole print farm easily.

SAFETY FEATURES

Every part we use is thoroughly tested in-house. This is why our 3D printers are highly reliable and safe to use. The MINI is equipped with three thermistors and comes with a high-quality power supply (Delta or Mean Well - depending on region) for safe and reliable information.

COMPACT SIZE

With a footprint of 38×33 cm (15×13 in), the MINI is an incredibly compact, yet fully equipped 3D printer, allowing you to stack several machines onto a single shelf. No matter whether you’re limited by space, or you want to build a printing farm - the MINI has a perfect size.

FLEXIBLE PRINT SHEETS

Removing a print has never been easier! With the magnetic heatbed and removable spring steel sheets, you can remove a printed object merely by bending the steel sheet. The surface is easy to maintain and comes in two variants: smooth and textured.

ONE-CLICK PRINTING

Once you insert a USB drive with a sliced object, a new menu with an object preview window appears. Confirm the selection with a single click of the control wheel and watch the printer do the rest for you.

GEARED EXTRUDER

To decrease the weight of the extruder, we moved the extruder motor on the Z-axis column. Using a 3:1 drive gear ratio, the printer pushes the 1.75 filament strand through a PTFE tube into the hotend and through the 0.4mm nozzle.

32BIT CONTROLLER STM32

More power, more options. Our brand new custom-made 32-bit “Buddy” motherboard with Trinamic 2209 drivers brings more bang for your bucks. It’s capable of nearly everything OctoPrint can do, including farm management software (future firmware update).


SEE THE ORIGINAL PRUSA MINI IN ACTION!

Interview with Josef Prusa by 3D Printing Nerd

Josef Prusa with Thomas Sanladerer about the MINI

First look at the MINI with Josef Prusa by 3D Maker Noob


FEATURES & PARAMETERS

  • Removable magnetic spring steel sheet with PEI surface (*)
  • Brand new 32-bit “Buddy” motherboard
  • Silent Trinamic 2209 stepper drivers
  • Ethernet RJ45 port and optional future ESP Wi-Fi module upgrade
  • 3 thermistors, fan RPM sensors
  • Bowden system with 3:1 gearing

* Consumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.

  • Build volume 18 x 18 x 18 cm | 7 x 7 x 7 in
  • Trinamic drivers with 256 microstepping
  • Fast preheat: PLA 1 min / ASA 3 min
  • Sensorless homing for X and Y axes
  • 2.8″ graphic 65k color screen with G-Code preview
  • Supported materials - PLA, PETG, ASA, ABS, Flex
  • Printer dimensions (without spool holder & external PSU): 38×38×33 cm; 15×15×13 in (D×H×W)
  • Shipping box dimensions: 11kg (volumetric weight); 48,5×40,5×26,5 cm; 19×16×10 in
  • Prusament PLA sample weight: ~2x25g

6 REASONS WHY YOU WANT ORIGINAL PRUSA MINI


1

FANTASTIC PRICE/PERFORMANCE RATIO

We designed the MINI to be a true 3D printing workhorse. Thanks to its compact dimensions, you can build an entire print farm to produce mechanical parts at a rapid pace. And the affordable price makes the MINI a great first 3D printer for everyone.


2

GREAT 24/7 SUPPORT

We are working hard to help you start 3D printing as soon as possible. We are providing full 24/7 customer support with live chat and e-mail in seven languages. You can also use our community forum and knowledge base.


3

SIMPLE 3-PIECE ASSEMBLY

The Original Prusa MINI 3D printer features a streamlined design while retaining the same level of reliability as the rest of the Original Prusa family. The printer comes separated into 3 parts - attach them together, run the calibration and you’re ready to print!


4

READY TO PRINT SETTINGS

Original Prusa MINI is fully supported in our own open-source slicing software, PrusaSlicer. It is a feature-rich, frequently updated tool that contains everything you need to export perfect print files. We provide fine-tuned profiles for all supported materials.


5

OPEN-SOURCE DESIGN AND GREAT COMMUNITY

All parts of our printer are open-source. The community around our printers is huge and the feedback is overwhelmingly positive - just check the Facebook groups or YouTube videos! There‘s so much to do with your 3D printer - buying it is just the beginning!


6

QUALITY GUARANTEED BY JOSEF PRUSA & PRUSA RESEARCH

Prusa Research is a 3D printing manufacturer located in Prague, Czech Republic. The company was founded by Josef Prusa, one of the core members of the open-source RepRap community, in 2012. Prusa Research develops and produces 3D printers exclusively in its Prague's HQ. Since 2012, more than 150.000 Original Prusa 3D printers has been sold worldwide, receiving praise from both the media and 3D printing enthusiasts. The company also develops its own open-source slicing software PrusaSlicer and produces high-quality in-house-made filament called Prusament. Prusa Research's products are covered by international warranty. The company offers 60-day hasslefree returns (conditions apply)


ORIGINAL PRUSA MINI GIFT VOUCHERS

We prepared gift vouchers you can give to your relatives or friends before the MINI arrives to you. You can download the voucher of your choice down below.

GIFT VOUCHER


Original Prusa MINI Original Prusa i3 MK3S

Build volume

18 x 18 x 18 cm | 7 x 7 x 7 in25 x 21 x 20 cm | 9.84 x 8.3 x 8

Layer height

0.05 – 0.35 mm0.05 – 0.35 mm

Max travel speed

200+ mm/s200+ mm/s

Max hotend/heatbed temp.

280 °C / 100 °C (536 °F / 212 °F)

300 °C / 120 °C (572 °F / 248 °F)

Mainboard

Custom 32-bit Buddy electronics with STM32 and latest Trinamic 2209 silent stepper drivers

Einsy RAMBo 8-bit board with Trinamic 2130 drivers co-developed with Ultimachine

MMU2S support

No

Yes

Extruder

Bowden system with 3:1 gearing

Direct drive

LCD screen

2.8″ graphic 65k color screen

Monochromatic LCD

Print surface

magnetic heatbed with removable PEI spring steel sheets

magnetic heatbed with removable PEI spring steel sheets

Filament diameter

1.75mm

1.75mm

Nozzle diameter

0.4mm (default) / other nozzle diameters supported

0.4mm (default) / other nozzle diameters supported

Supported materials

PLA, PETG, ASA, ABS, Flex

Any thermoplastic including Nylon and Polycarbonate

Filament sensor

Optional upgrade

Yes (IR)

Power panic

Future software upgrade, single layer accuracy

Hardware-based, single G-code line accuracy

Ethernet connection

Yes

Via Raspberry Pi

Wi-Fi connection

Optional upgrade

Via Raspberry Pi

Advanced sensors

3 thermistors, fan RPM sensors

4 thermistors, fan RPM sensors

Farm mode

Yes (upcoming feature)

No

Calibration

Automatic, Mesh Bed Leveling

Automatic, Mesh Bed Leveling

Print medium

USB drive / LAN

SD card

Firmware update interface

USB drive / LAN

USB port

Power supply

160W, external adapter by Mean Well or Delta depending on the region

240W, custom made by Delta with Power Panic HW

Kit price

349 USD / 379 EUR (VAT incl.)

749 USD / 769 EUR (VAT incl.)

Assembled printer price

-

999 USD / 999 EUR (VAT incl.)

Reviews

Grade 
08/06/2020

The highest quality per dollar printer.

I have owned 5 3D printers over the last decade and by a wide margin the Original Prusa MINI is my favorite. It is worth far more than the retail price.
It took less than an hour from unboxing to printing QUALITY prints.

The new control board with built in ethernet and the amazing Trinamic 2209 drivers makes this one of the smoothest, and most versatile printers out there.

The flexible steel print surface is one of those features that once you use, you can't use anything else.

The integration with PRUSA slicer makes creating g-code trouble free and FAST.

I've got to hand it to PRUSA, I would have been terrified to launch this product because I'd be afraid it would eviscerate sales of everything else they make.... it's that good.

    Grade 
    07/18/2020

    Thumbs up

    To improve: screwing the 2nd and 3rd nuts for the base & Z connection was moderately difficult.

    Pros: incomparable assembly time, simplicity & ease vs MK2S MK3S SL1. Small footprint. Idea of 2 Minis vs 1 MK3S speed is awesome. Mini is unfathomably cheap compared to MK3S.

    Wanted: More Mini assembly as printed part design is interesting to look at and assembly is educational. XL release.

    • 2 out of 2 people found this review useful.
    Grade 
    06/01/2020

    Another!

    I have been printing with a Prusa I3 MK3S since March of 2019 and have had nothing but good things to say about it. There have been few issues (really nothing more than clogged nozzles and a wire I damaged when changing one of those).

    I've had my MINI for about three weeks now. It took me roughly an hour from the time I cracked the tape on the box until I was adjusting the Z-calibration. Watching the assembly video before starting was definitely helpful. I don't know if I would have been able to figure out where to put all the cabling without it.

    The color LCD interface is an excellent improvement over the Mk3S. Its smaller build plate can still handle something like 90% of the STL's I had acquired to use with the MK3S. I'm very much looking forward to managing the printer remotely over the network as that functionality becomes available.

    Since I got it built, I have barely given the little guy a moment's rest, and it has risen to the challenge. I am getting excellent quality with no tuning required from the stock settings in PrusaSlicer. I like it so much that I am already considering ordering a second one.

    • 23 out of 24 people found this review useful.
    Grade 
    05/29/2020

    Awesome!

    My first 3D printer had to be a Prusa after watching the Prusa Factory Tour video on YouTube. Prusa has amazing inventory management and quality control processes that yields one thing: an amazing product. Prusa knows what they are doing. This was a no-brainier. I just received my printer 2 days ago and have already printed over 20 hours using both Prusament PLA and non-Prusa PETG and the results have been flawless.

    • 8 out of 9 people found this review useful.
    Grade 
    05/27/2020

    Dennis Gray

    This is our 2nd Prusa 3D printer - I bought this one for my wife, who ABSOLUTELY LOVES IT! She has been printing non-stop for 4 days since she built it, without a single solitary print failure! She's even tried using some really old brittle filament that I wouldn't touch and IT WORKED GREAT! I am impressed, and I have a happy wife! Thanks to ALL at Prusa Research - WELL DONE!

    • 8 out of 8 people found this review useful.
    Grade 
    05/25/2020

    This printer is brilliant!

    If you are looking for a first printer look no further. Amazing Print quality. I do have so much fun with it. My first 3D printer and it worked right from the start. Thanks Prusa!

    • 6 out of 6 people found this review useful.
    Grade 
    05/20/2020

    working well for a beginner

    The Prusa Mini is my first 3d Printer and it works really well for me.
    Up until now I printed with PLA and PETG and changed the nozzle from 0.4 to 0.25 and back to 0.4 without problems.

    • 10 out of 10 people found this review useful.
    Grade 
    05/11/2020

    First FDM Printer

    This is my first FDM printer and I love it. Hit print, walk away, come back when it's done with no problems. Reliable and great prints. Planning on buying another Prusa.

    • 6 out of 6 people found this review useful.
    Grade 
    05/01/2020

    Pretty good so far!

    Awesome introductory tool to 3d printing! Really good for small things. Kind of tricky for bigger things, still learning.

    • 5 out of 5 people found this review useful.
    Grade 
    04/22/2020

    My First Prusa

    I have to say it was one surprise after another with this machine. A little backround. I have 4 3D printers at present. My first was a Tevo Tarantula, (the old version...); second worst printer I've had. The next one i got was a Flashforge Creater Pro. Overpriced and with a smaller build plate than the mini but almost 3x the cost. Then i purchased the Tronxy X5S. I somewhat knew what i was getting into as i was tired of having a small printer. I wanted something with some serious build volume. 7 months later and hundreds of dollars in upgrades, it's printing ok. The good thing is it prints consistently now. I also purchased a Pxmalion Core i3 which was a piece of junk.

    And then there's the Prusa Mini. Holy crap. I opened it to find two things. One, there was a face mask included to showcase how i could help with the pandemic effort. Then there was the stickers.....I yelled like a little girl as i grabbed my favorite bottle and added a new addition to my collection. We guys in the armory tend to like to decorate our bubba bottles and hydroflasks with stickers so it made me really happy.

    The build was a piece of cake and i was surprised by the excellent quality. My first print had issues as the printer seemed to be losing its home and started grinding against the frame. A quick firmware update fixed that no problem and i was off to my first benchy with the beautiful filament included.

    That benchy is going to the grave with me as it is just so beautiful.

    I would 100% recommend this to everyone i know.

    Thank you for this machine and i hope to do business again with yall soon!

    • 13 out of 14 people found this review useful.

    Write a review

    Original Prusa MINI

    Original Prusa MINI

    Introducing our new compact 3D printer with all the bells and whistles you would expect from the creators of the award-winning Original Prusa i3 MK2 and MK3S! The MINI is a big printer in a compact body. We did our best to squeeze as many features into the lowest possible price as possible. The MINI is great for beginners, companies looking to build a printing farm and 3D printing enthusiasts worldwide.

    SMART - STARTER PRINTER

    AFFORDABLE - SECONDARY PRINTER

    RELIABLE - PRINT FARM WORKHORSE

    Save on Prusament shipping costs! Select one Prusament of your choice in the configuration menu on the right side on this page. We will add the Prusament directly to the Original Prusa MINI box and the shipping cost stays the same as for the MINI on its own.