Original Prusa MINI+

Introducing our new compact 3D printer with all the bells and whistles you would expect from the creators of the award-winning Original Prusa i3 MK2 and MK3S! The MINI+ is a big printer in a compact body. We did our best to squeeze as many features into the lowest possible price as possible. The MINI+ is great for beginners, companies looking to build a printing farm and 3D printing enthusiasts worldwide.

SMART - STARTER PRINTER

AFFORDABLE - SECONDARY PRINTER

RELIABLE - PRINT FARM WORKHORSE

This listing is a simple 3-piece assembly. We also offer a DIY KIT for self-assembly.

Save on Prusament shipping costs! Select one Prusament of your choice in the configuration menu on the right side on this page. We will add the Prusament directly to the Original Prusa MINI+ box and the shipping cost stays the same as for the MINI+ on its own.

More details

The leadtime of orders is less than a week.



$399.00

  No VAT

Add to wishlist

More info

ORIGINAL PRUSA MINI+

SMART AND COMPACT 3D PRINTER FOR EVERYONE!

Original Prusa MINI+ - smart and compact 3D printing workhorse with all the bells and whistles you’re accustomed to when you buy an Original Prusa 3D printer. MINI+ will surprise you. :-) It has a print volume of 18 cm (7”) cubed, removable spring steel sheets, ethernet and optional Wi-Fi and it’s based on our brand new custom-made 32-bit Buddy mainboard with silent 2209 Trinamic drivers. And we pushed the price under 349 USD / 379 EUR (VAT incl.)!

WITH THE ORIGINAL PRUSA MINI+ WE ARE INTRODUCING:

SuperPINDA

SuperPINDA is a temperature-independent probe that doesn’t suffer from temperature drift and makes the first layer consistent – for example if you are running one print after another but set the Live Adjust Z with a cold printer.

Y-Axis improvements

The U-bolts which were used to secure the Y-axis bearings are gone, too. Instead, there’s a new set of metal clips, which are easier to mount and provide slightly better support for the bearings.

New firmware features

We are improving the firmware regularly on all our printers. However, with MINI+ we have huge plans and we keep adding new features. We have already introduced Prusa Connect Local in 4.0.5 and even more exciting things are about to come!


WHAT WE ARE PROUD OF...

The most significant features of Original Prusa MINI+

BUILD VOLUME

Featuring a 7"×7"×7" (18×18×18 cm) build volume, the MINI+ is a fully-equipped 3D printer. Featuring sensorless homing, automatic Mesh Bed Calibration, replaceable nozzles, network connectivity, USB printing and a full-color LCD screen, the MINI+ is a big printer in a small body.

COLOR LCD SCREEN

Configure your 3D printer with ease and see previews of sliced models before you start printing! Thanks to the 2.8’’, 240×320 LCD screen with 65.000 colors, every option is just a few clicks away.

NETWORK CONNECTIVITY

The MINI+ comes standard with an ethernet RJ45 port and optional future ESP Wi-Fi module upgrade. Send files to the printer wirelessly, or download OTA firmware updates. Thanks to the future updates you will be able to manage a whole print farm easily.

SAFETY FEATURES

Every part we use is thoroughly tested in-house. This is why our 3D printers are highly reliable and safe to use. The MINI+ is equipped with three thermistors and comes with a high-quality power supply (Delta or Mean Well - depending on region) for safe and reliable information.

COMPACT SIZE

With a footprint of 38×33 cm (15×13 in), the MINI+ is an incredibly compact, yet fully equipped 3D printer, allowing you to stack several machines onto a single shelf. No matter whether you’re limited by space, or you want to build a printing farm - the MINI+ has a perfect size.

FLEXIBLE PRINT SHEETS

Removing a print has never been easier! With the magnetic heatbed and removable spring steel sheets, you can remove a printed object merely by bending the steel sheet. The surface is easy to maintain and comes in two variants: smooth and textured.

ONE-CLICK PRINTING

Once you insert a USB drive with a sliced object, a new menu with an object preview window appears. Confirm the selection with a single click of the control wheel and watch the printer do the rest for you.

GEARED EXTRUDER

To decrease the weight of the extruder, we moved the extruder motor on the Z-axis column. Using a 3:1 drive gear ratio, the printer pushes the 1.75 filament strand through a PTFE tube into the hotend and through the 0.4mm nozzle.

32BIT CONTROLLER STM32

More power, more options. Our brand new custom-made 32-bit “Buddy” motherboard with Trinamic 2209 drivers brings more bang for your bucks. It’s capable of nearly everything OctoPrint can do, including farm management software (future firmware update).


SEE THE ORIGINAL PRUSA MINI / MINI+ IN ACTION!

THOMAS SANLADERER: THE NEXT "BIG" THING

"I think the MINI is a great machine, especially for the price. You won't find a more complete package of solid hardware, usable firmware, good documentation and great software under 400 bucks.” Watch the video...

ALL3DP: EDITOR'S CHOICE

"This small and sturdy machine uses an excellent slicer, comes with a magnificent metal bed, and overall, gives you excellent print quality. It’s difficult to see how anyone could be disappointed with it.” Read more...

MAKE: FIRST IMPRESSIONS

"Right out of the box, this thing is so impressive (...) You can get yourself pretty much what I consider to be a top-of-the-line performance printer for 350 USD.” Watch the video...

3D PRINTERLY REVIEW

"When we weigh up the price, performance, reliability and overall product, it is highly recommended for most people to purchase because it does things so well.” Read more...

UNCLE JESSY: INITIAL IMPRESSIONS

"If you are in the market for a smaller 3D printer that prints really great things and is pretty easy to use, this is a great option for you (...) the print quality on this is so damn nice!” Watch the video...

IO3DPRINT REVIEW

"Prusa have done all they can to pack the features of their best selling 3D printers into a smaller and cheaper package. The Mini may be small but it’s reliable, built to last and delivers excellent print quality just like it’s bigger siblings.” Read more...


FEATURES & PARAMETERS

  • Removable magnetic spring steel sheet with PEI surface (*)
  • Brand new 32-bit “Buddy” motherboard
  • Silent Trinamic 2209 stepper drivers
  • Ethernet RJ45 port and optional future ESP Wi-Fi module upgrade
  • 3 thermistors, fan RPM sensors
  • Bowden system with 3:1 gearing
  • SuperPINDA probe - no temperature drift (more info)

* Consumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.

  • Build volume 18 x 18 x 18 cm | 7 x 7 x 7 in
  • Trinamic drivers with 256 microstepping
  • Fast preheat: PLA 1 min / ASA 3 min
  • Sensorless homing for X and Y axes
  • 2.8″ graphic 65k color screen with G-Code preview
  • Supported materials - Wide range of thermoplastics, including PLA, PETG, ASA, ABS, PC (Polycarbonate), CPE, PVA/BVOH, PVB, HIPS, PP (Polypropylene), Flex, nGen, Nylon, Woodfill and other filled materials.
  • Printer dimensions (without spool holder & external PSU): 38×38×33 cm; 15×15×13 in (D×H×W)
  • Shipping box dimensions: 11kg (volumetric weight); 48,5×40,5×26,5 cm; 19×16×10 in
  • Prusament PLA sample weight: ~2x25g

6 REASONS WHY YOU WANT ORIGINAL PRUSA MINI+


1

FANTASTIC PRICE/PERFORMANCE RATIO

We designed the MINI+ to be a true 3D printing workhorse. Thanks to its compact dimensions, you can build an entire print farm to produce mechanical parts at a rapid pace. And the affordable price makes the MINI+ a great first 3D printer for everyone.


2

GREAT 24/7 SUPPORT

We are working hard to help you start 3D printing as soon as possible. We are providing full 24/7 customer support with live chat and e-mail in seven languages. You can also use our community forum and knowledge base.


3

SIMPLE 3-PIECE ASSEMBLY

The Original Prusa MINI+ 3D printer features a streamlined design while retaining the same level of reliability as the rest of the Original Prusa family. The printer comes separated into 3 parts - attach them together, run the calibration and you’re ready to print!


4

READY TO PRINT SETTINGS

Original Prusa MINI+ is fully supported in our own open-source slicing software, PrusaSlicer. It is a feature-rich, frequently updated tool that contains everything you need to export perfect print files. We provide fine-tuned profiles for all supported materials.


5

OPEN-SOURCE DESIGN AND GREAT COMMUNITY

All parts of our printer are open-source. The community around our printers is huge and the feedback is overwhelmingly positive - just check the Facebook groups or YouTube videos! There‘s so much to do with your 3D printer - buying it is just the beginning!


6

QUALITY GUARANTEED BY JOSEF PRUSA & PRUSA RESEARCH

Prusa Research is a 3D printing manufacturer located in Prague, Czech Republic. The company was founded by Josef Prusa, one of the core members of the open-source RepRap community, in 2012. Prusa Research develops and produces 3D printers exclusively in its Prague's HQ. Since 2012, more than 150.000 Original Prusa 3D printers has been sold worldwide, receiving praise from both the media and 3D printing enthusiasts. The company also develops its own open-source slicing software PrusaSlicer and produces high-quality in-house-made filament called Prusament. Prusa Research's products are covered by international warranty. The company offers 60-day hasslefree returns (conditions apply)


Original Prusa MINI+ Original Prusa i3 MK3S+

Build volume

18 x 18 x 18 cm | 7 x 7 x 7 in25 x 21 x 20 cm | 9.84 x 8.3 x 8

Layer height

0.05 – 0.25 mm with 0.4 mm nozzle0.05 – 0.35 mm

Max travel speed

200+ mm/s200+ mm/s

Max hotend/heatbed temp.

280 °C / 100 °C (536 °F / 212 °F)

300 °C / 120 °C (572 °F / 248 °F)

Mainboard

Custom 32-bit Buddy electronics with STM32 and latest Trinamic 2209 silent stepper drivers

Einsy RAMBo 8-bit board with Trinamic 2130 drivers co-developed with Ultimachine

MMU2S support

No

Yes

Extruder

Bowden system with 3:1 gearing

Direct drive

LCD screen

2.8″ graphic 65k color screen

Monochromatic LCD

Print surface

magnetic heatbed with removable PEI spring steel sheets

magnetic heatbed with removable PEI spring steel sheets

Filament diameter

1.75mm

1.75mm

Nozzle diameter

0.4mm (default) / other nozzle diameters supported

0.4mm (default) / other nozzle diameters supported

Supported materials

Any thermoplastic except Carbon filled

Any thermoplastic including Nylon and Polycarbonate

Filament sensor

Optional upgrade

Yes (IR)

Power panic

Future software upgrade, single layer accuracy

Hardware-based, single G-code line accuracy

Ethernet connection

Yes

Via Raspberry Pi

Wi-Fi connection

Separate future upgrade (ESP Wi-Fi module)

Via Raspberry Pi

Advanced sensors

3 thermistors + SuperPINDA, fan RPM sensors

3 thermistors + SuperPINDA, fan RPM sensors

Farm mode

Yes (upcoming feature)

No

Calibration

Automatic, Mesh Bed Leveling

Automatic, Mesh Bed Leveling

Print medium

USB drive / LAN

SD card

Firmware update interface

USB drive / LAN

USB port

Power supply

160W, external adapter by Mean Well or Delta depending on the region

240W, custom made by Delta with Power Panic HW

Kit price

349 USD / 379 EUR (VAT incl.)

749 USD / 769 EUR (VAT incl.)

Assembled printer price

399 USD / 419 EUR (VAT incl.)

999 USD / 999 EUR (VAT incl.)

Reviews

Grade 
03/31/2021

Great Customer Service

This is more a review of the company as a whole. I ordered the kit for this printer and received some of the wrong sized parts. As a result, I reached out and followed their procedure to remedy the problem and within DAYS, they sent the correct parts and I can’t emphasize enough how good their customer service is consequently!

    Grade 
    03/30/2021

    Love this printer!

    It's just the perfect printer for beginners.
    First I had some issues with the extruder but fixed it with help from the support/community.

    Now it's printing pla and petg perfectly fine without problems.
    It is definitely worth the price ;)

      Grade 
      03/14/2021

      Solid piece of hardware

      After paying to alter my order to the pre-assembled model, it was shipped in a couple of weeks much to my delight.
      Upon arrival, and assembling the 3 main pieces and calibrating, I begun printing the test models on the FAT32 drive, which printed flawlessly.
      I decided to print a much smaller, more intricate model of my own design, and noticed some slight over extrusion, but nothing that can't be fixed.
      The polish present in the device's construction and the GUI shines through.
      All in all, a solid printer, and well worth the wait.

        Grade 
        02/04/2021

        Amazing printer for a beginner like me

        I've been using it almost non stop since I got it, been printing DnD minis and some bigger art pieces. For an FDM printer they all look fabulous with very minor cleanup needed.

        PROS:
        - Easy assembly (if you like IKEA, you'll like this)
        - SO user friendly! I've been using the Prusa slicer and all the basic settings just work perfectly. (at the same time I feel I can dive into micromanaging the settings if I want to)
        - Beautiful prints every time

        CONS
        - I already wish it was bigger, and am now starting to consider getting a bigger printer from them as well. RIP wallet
        - The filament feeder gets jammed every time I change filaments. I have to disassemble and reassemble the tubes which is a bit of a (5 min) hassle

          Grade 
          01/24/2021

          This printer brought me back into 3d printing

          If they had 10 stars I'd totally give it 10. After a year of dealing with subpar prints of a Tevo Tornado and the trolls that inhabit Tevo's facebook group(Tevo's version of customer service) I gave up on 3d printing. Then I decided to give Pursa a try. Upon receiving my printer I ran into a couple of hiccups but the excellent customer service at Pursa saw me through those. At this point I've been printing as much as my schedule will allow and in the 2 weeks I've had the mini I have printed more objects that have come out perfectly than I had ever printed with the Tevo Tornado. If you're looking for a starting point in 3d printing the Pursa Mini would be the perfect place to start.

            Grade 
            01/22/2021

            Nothing Beats the Mini

            The Mini is an incredibly well designed printer for the money. It outclasses a few printers that cost double what it does. Overall very happy with it

              Grade 
              12/21/2020

              Horrible

              It's horrible. It was too annoying to assemble and I can't even unload a filament.

              I know this review is gonna be deleted by people in prusa. But I couldn't help but to leave an honest review of mine.

              • 0 out of 1 people found this review useful.
              Grade 
              12/15/2020

              Secondary printer same delight

              My first printer is a MK3s and i knew i was not gonna be satisfied with a more basic printer after the experience with MK3s.
              I´m actually more impressed with the MINI+. I was one of the lucky ones who got upgraded by default. It`s absolutely nothing wrong with the MK3 don´t get me wrong it´s a real Ardennes workhorse who basically have printed 24/7 since a got it.
              But i´m more impressed what Prusa Research with Jo in the lead have achieved to make a printer for half the price without lose the printquality. 10 points for you guys!!
              Shore it´s smaller but for 95% of my printings it´s enough and you must cut somewhere to achieve the pricetag. The only thing i´m missing is the sheetprofile for textured vs smooth 1&2 a.s.o. But i´m quite shore that´s gonna be in a future update.
              And this is definitely not my last Prusa.
              I appreciate the robust build of the MK3s and can understand the pricetag of it and in the same time impressed with the graceful printing of the MINI+ and the pricecut. I can not decide which one i like best because they both there place in the market. It does not matter which one you choose bec you are not gonna be disappointed.

              Happy printing and take care out there.

                Grade 
                12/04/2020

                Amazing

                I love a well engineered tool and this is certainly that! Every single piece and function of this machine was clearly labored over and it shows. A fantastic printer engineered by excellent people.

                  Grade 
                  10/21/2020

                  Great printer but needs refinement

                  Received this little gem exactly 61 days after I placed the order.

                  Very easy to assemble and get up and running.
                  Quality of parts and documentation are top notch.
                  Included profiles in the Slicer work great.
                  The printer produces high quality prints.

                  Currently, there is a limitation in the MINDA probe that results in inconsistent first layer height. When the probe is cold, the printer sets the nozzle farther away from the bed surface. Once you've made one print and the probe becomes heat soaked, the next print will see the nozzle set closer to the bed. This isn't an issue if you don't care about your bottom layer finish quality. The current work around is to preheat the printer.

                  All in all still a great entry level printer. I'm sure lots of people are buying this printer as there first printer and are learning as they go. If they don't have the experience to recognize a limitation in the hardware then they won't complain about it. I hope this review helps you on your purchase decision.

                    Write a review

                    Original Prusa MINI+

                    Original Prusa MINI+

                    Introducing our new compact 3D printer with all the bells and whistles you would expect from the creators of the award-winning Original Prusa i3 MK2 and MK3S! The MINI+ is a big printer in a compact body. We did our best to squeeze as many features into the lowest possible price as possible. The MINI+ is great for beginners, companies looking to build a printing farm and 3D printing enthusiasts worldwide.

                    SMART - STARTER PRINTER

                    AFFORDABLE - SECONDARY PRINTER

                    RELIABLE - PRINT FARM WORKHORSE

                    This listing is a simple 3-piece assembly. We also offer a DIY KIT for self-assembly.

                    Save on Prusament shipping costs! Select one Prusament of your choice in the configuration menu on the right side on this page. We will add the Prusament directly to the Original Prusa MINI+ box and the shipping cost stays the same as for the MINI+ on its own.

                    Download