The Olsson Ruby

The Olsson Ruby is a high-quality wear resistant nozzle by 3DVERKSTAN. It's designed to print highly abrasive materials while retaining the excellent heat conductivity of brass.

Be careful: If you are replacing the Olsson Ruby nozzle, please visit this website for instructions, otherwise you might damage it!

More details

In Stock



$90.00

  No VAT

Add to wishlist

More info

Be careful: If you are replacing the Olsson Ruby nozzle, please visit this website for instructions, otherwise you might damage it!

The Olsson Ruby is a high-quality nozzle by 3DVERKSTAN. It's designed to print highly abrasive materials while retaining the excellent heat conductivity of brass.

The Olsson Ruby will work with a huge range of materials. PLA, ABS, CPE/PET, Nylon, and composites with abrasive additives such as Carbon fibre, Steel, Wood, etc.

The ruby mounted at the tip makes sure that even the toughest materials will be printable. It was originally designed for printing with Boron Carbide (B4C), the third hardest known material in the world.

Since most of the Olsson Ruby is made from brass, with its excellent heat conductivity, performance and throughput is first-class.

You can find more info at www.olssonruby.com.

Reviews

Grade 
03/16/2021

Worse than brass

I bought into the hype, and believed the fancy wording on this site too; decided to make the Olsson Ruby my main 0.4 nozzle.
I ran into major problems, and it's not like I haven't tried a lot to fix it; I took apart the head several times, tried to adapt the PTFE tube, tried to clean the Olsson Ruby, used different filaments...
The filament tends to gunk-up, accumulating in it instead of flowing out. This sometimes prevents an output altogether, or makes a perfect first-layer impossible. Seems like it's because the ruby's input isn't shaped like a funnel?
It took so much of my time and never outperformed the brass nozzle that shipped with my MK3S.
Would have given it 1 start if it malfunctioned 100% of the time; consider my rating generous. I'm going to replace it one last time with a brass or stainless-steel nozzle, and try to forget that I bought trouble for 90 dollars.

  • 18 out of 18 people found this review useful.
  • 1

Write a review

The Olsson Ruby

The Olsson Ruby

The Olsson Ruby is a high-quality wear resistant nozzle by 3DVERKSTAN. It's designed to print highly abrasive materials while retaining the excellent heat conductivity of brass.

Be careful: If you are replacing the Olsson Ruby nozzle, please visit this website for instructions, otherwise you might damage it!