Special colorFabb XT-CF20 filament with 20% carbon fiber for use in 3D printers. Best to use with hardened stainless steel nozzle. Regular brass nozzle can be damaged.
colorFabb XT is a simple to use printing material. Great for larger prints that need to have good thermal resistance.
Warning: Last items in stock!
ColorFabb XT-CF20 is based on ColorFabb XT. It is a general purpose, odor-free, and temperature resistant co-polyester reinforced with 20% carbon fibers.
The addition of carbon fibers gives this filament unique properties. Products printed with ColorFabb XT-CF20 are strong, rigid and durable with
This material is great for a variety of industries, such as RC models, drones, aerospace or automotive.
However, XT-CF20 accelerates the nozzle-wear of standard brass nozzles much faster than unfilled filaments. Using a hardened stainless steel nozzle is strongly recommended.
Strong, rigid and durable
Requires hardened stainless steel nozzle
Loaded with 20% carbon fibers
Tends to ooze and create nozzle blobs
High-temperature resistance (up to 80°C)
Low odor / Styrene Free solution
Highly attractive matt black surface
Approximate filament length: 250 m
colorFabb XT filament is produced from Amphora™ 3D Polymer by Eastman Chemical Company by colorFabb.
1.75 mm filament is manufactured with a precision of +- 0.05 mm
We reserve the right to ship weights +/- 5% due to packaging variations.
Before printing, make sure the surface of heatbed is clean as described in 3D Printing Handbook.
Smooth PEI surface preparation! Make sure to apply Kores glue on the smooth PEI before printing. Glue serves as a separating agent and helps to protect the surface when removing the finished print from getting damage. Without the glue, the filament adhesion may be too strong!