All metal RepRap hot-end with one piece design, capable of printing ABS, PLA, Polycarbonate, Nylon and others. We make only 3mm version.
Este producto ya no está disponible
Advertencia: ¡Últimos artículos en inventario!
Made to rule them all.
The Prusa nozzle is made from two main parts - The CORE and The HEATSINK. Both press-fitted together to achieve the best thermal contact.
Very precisely machined and with lapped 3.15mm inside to achieve smoothest filament feed possible and jam proof. No possible way of filament leakage. Only part which is in contact with filament. Stainless steel design allows you to print from almost every thermoplastic you can get in 2.9mm filament. For example ABS, PLA, PET, PC, Nylon, Laywood, Laybrick and many more.
Made out of one piece of aluminium to get best thermal distribution and cooling. Combined design with Groove-mount.
Press-fitted on The CORE to achieve best thermal contact with it. Aluminium has approximately 2x bigger thermal shrinkage, that means there is no possible way of self disassembly.
Specially developed for this nozzle. Made in a same company and by the same person as the nozzle to achieve best compatibility. Fitted with cartridge heater and EPCOS B57560G104F NTC thermistor.
Powerful enough to heat The NOZZLE to 600°C ! (If you replace thermistor with thermocouple)
Made out of one piece food safe stainless steel alloy (303 A1). Stainless steel design allows you to print from almost every thermoplastic you can get in 2.9mm filament.
Very precisely machined and with lapped 3.15mm inside to achieve smoothest filament feed possible and jam proof. There is no possible way of filament leakage.
Food safe alloy has minimal impact to filament purity so if you have food safe filament, your prints would have much higher chance to be food safe.
Prusa nozzle MKII
More info about using the nozzle at prusanozzle.org.
Made in Czech republic. Every sale supports next RepRap development.
No hay reseñas de clientes en este momento.