sven.b2
Posts: 3
Joined: Thu Jun 08, 2017 10:52 am
Contact: Send private message

What Gcode is senden when you abort a print (SD)

Sun Feb 18, 2018 5:55 pm

Hi guys,

I wanted to know what gcode is sended when you abort a print via the lcd display (print from sd card).
Using the latest 3.1.0 firmware on an MK2.

The Nozzle lifts up and the bed comes forth. I want to know the gcode for that. I am mainly using Octoprint so I want to add the gcode for abort a print there

many thanks
Sven

durand.r
Posts: 32
Joined: Mon Mar 13, 2017 2:05 pm
Contact: Send private message

Re: What Gcode is senden when you abort a print (SD)

Mon Feb 19, 2018 5:18 pm

> I wanted to know what gcode is sended when you abort a print via the lcd display (print from sd card).

It send nothing, it just stop reading and do dome hard-coded stuff.

What you want (nozzle lift up, bed advance):

To move the head up 2mm, write
G91
G1 Z2.00 F7200.000
G90

To move the bed in the front, write
G0 Y210.0 F7200.000

To "abord" a print, just write nothing after that point.


source : http://reprap.org/wiki/G-code

Return to “Others (Archive)”

Who is online

Users browsing this forum: Google [Bot] and 2 guests