Posts: 2
Joined: Jun 14, 2018 7:20 am
Contact: Send private message

Print issues after recalibration

Jun 14, 2018 7:31 am

My MK2 was working great until the thermistor wire got loose and blocked the Y movement. So I fixed and recalibrated but that failed initially due to an issue with the PINDA but got I readjusted it, and and recalibrated, and also did the live calibration (-.7)

Unfortunately now the prints are fine on the Y axis but are very bumpy on the X axis whereas they were smooth before (one day before- same PLA).

I was wondering if you knew why or had any calibration tips beyond the getting started videos.
IMG_0054.jpg (1.46 MiB) Viewed 140 times
X axis is very bumpy
IMG_0056.jpg (1.62 MiB) Viewed 140 times
Y is much smoother, but not as smooth as before

Thanks in advance


User avatar
Posts: 14
Joined: Dec 10, 2017 11:08 am
Contact: Send private message

Re: Print issues after recalibration

Jun 17, 2018 7:34 pm

Not very helpful, but something else in the X-axis has come loose, moved, been damaged.
Dave Jackson
"Enthralled Nooby (~57 years old)... If 3d printers had been around 40 years ago... "

Return to “Assembly and first prints troubleshooting”

Who is online

Users browsing this forum: No registered users and 2 guests