bert.v6
Posts: 24
Joined: Sat Aug 26, 2017 2:31 pm
Contact: Send private message

X-axis push thing too short?

Fri Nov 17, 2017 4:59 pm

Perhaps yet another human factor, I don't know.

During tests I noticed an error. The push thing that is supposed to hit the end switch of the x-axis seems to be too short:
No end stop :evil:
...
IMG_20171117_175136771.jpg
IMG_20171117_175136771.jpg (2.18 MiB) Viewed 81 times

adam.w3
Posts: 69
Joined: Mon Nov 21, 2016 9:06 pm
Topics answered: 1
Contact: Send private message

Re: X-axis push thing too short?

Fri Nov 17, 2017 5:25 pm

try turning the power off and slowly move the axis over to the end stop and see if anything hits the X-axis before it can get to the end stop, I know I had a issue with the zip tires on the cable rap hitting the rambo control box and was stopping mine from getting to the and stop

bert.v6
Posts: 24
Joined: Sat Aug 26, 2017 2:31 pm
Contact: Send private message

Re: X-axis push thing too short?

Sun Nov 19, 2017 12:04 pm

I had to remove a little part of the spiral wrap.
Thanks.

adam.w3
Posts: 69
Joined: Mon Nov 21, 2016 9:06 pm
Topics answered: 1
Contact: Send private message

Re: X-axis push thing too short?

Sun Nov 19, 2017 3:56 pm

glade I could help and that it was something simple :D

bert.v6
Posts: 24
Joined: Sat Aug 26, 2017 2:31 pm
Contact: Send private message

Re: X-axis push thing too short?

Sun Nov 19, 2017 4:27 pm

Yeah, so do I.
But Multi material certainly adds to the learning curve. :)

Return to “Original Prusa i3 MK2 Multi Material”

Who is online

Users browsing this forum: gert.l and 2 guests