• Impresora 3D Original Prusa i3 MK3 Kit

    ORIGINAL PRUSA I3 MK3

  • $599.00 En stock

    Prusa i3 es un diseño probado con decenas de miles de usuarios en todo el mundo. Ahora tiene una gran oportunidad de comprar una directamente del autor Josef Průša y apoyar más desarrollo. Todas las partes de esta impresora 3D son de Código Abierto y parte del RepRap Este artículo es un KIT de hágalo usted mismo para auto ensamblaje. También ofrecemos...

    $599.00
    En stock
  • $749.00 En stock

    Original Prusa i3 MK3 es la sucesora ode la gran reconocida impresora 3D Original Prusa MK2. ¡Con el extrusor rediseñado y la nueva cama magnética MK52 con una base reemplazable de acero con PEI, creemos que hemos desarrollado nuestra mejor impresora 3D! Este apartado es un KIT DIY para el montaje propio. También ofrecemos una impresora 3D totalmente...

    $749.00
    En stock
  • $7.25 En stock

    Boquilla Extra para el Hotend E3D V6.

    $7.25
    En stock
  • $20.99 En stock

    Filamento PLA negro para uso en impresoras 3D. PLA (Ácido poliláctico) es un material biodegradable y muy fuerte. Es el mejor material para imprimir partes grandes. Esto es posible gracias a su muy baja expansión térmica. Para más información sobre PLA, vea Wikipedia. Elegimos la resina 4043D Natureworks que es la mejor y la más ampliamente usada e la...

    $20.99
    En stock
  • $8.82 En stock

    Replacement PEI sheet for MK42 heatbed.

    $8.82
    En stock
  • $22.99 En stock

    Filamento negro de PETG para usarse en impresoras 3D. El PET (Tereftalato de polietileno) es un material muy fuerte y versátil con gran resistencia térmica. Es un gran material para imprimir partes mecánicas. El PET es grandioso para imprimir objetos grandes, porque casi no tiene deformaciones. Para más información sobre el PET consulte Wikipedia.

    $22.99
    En stock
  • $20.99 En stock

    Filamento PLA blanco para uso en impresoras 3D. PLA (Ácido poliláctico)es un material biodegradable y muy fuerte. Es el mejor material para imprimir partes grandes. Esto es posible gracias a su muy baja expansión térmica. Para más información sobre PLA, vea Wikipedia. Elegimos la resina 4043D Natureworks que es la mejor y la más ampliamente usada e la...

    $20.99
    En stock
  • $899.00 En stock

    Prusa i3 MK2 es el diseño más nuevo de ipresora 3D de Josef Prusa, con sinnúmero de mejoramientos. Todas las partes de esta impresora 3D están open source, están incluídas en proyecto RepRap y con compra apoyas próximo desenvolvimiento. Esta es una impresora completamente ensamblada. Si busca un KIT de hágalo usted mismo para auto ensamblaje, también lo...

    $899.00
    En stock
  • $299.00 En stock

    Original Prusa i3 MK3 Multi Material 2.0 is the unique consumer option to print with up to 5 different materials simultaneously. This enhanced version is much simpler than original MMU which makes it easier to use and less sensitive to the quality of filament. If you already have MM for MK2/S, you should buy Multi Material upgrade kit - from MK2 to...

    $299.00
    En stock
  • $999.00 En stock

    The Original Prusa I3 MK3 is the successor of the award-winning Original Prusa i3 MK2 3D printer. With the rebuilt extruder, a plethora of sensors and the new magnetic MK52 heatbed with replaceable PEI spring steel print sheet we believe that we've developed our best 3D printer yet!   This is a fully assembled printer. If you're looking for DIY KIT, you...

    $999.00
    En stock
  • $3.61 En stock

    You will need ABS Juice if you own older types of our printers. With the Original Prusa i3 MK2 / S, MK2.5 and MK3 you don't need to use ABS Juice anymore. Attention: ABS Juice contains acetone and unfortunately it’s not possible to ship via air. For this reason, we can provide you just a spray bottle with ABS granules. You need to add acetone later.

    $3.61
    En stock
  • $25.48 En stock

    Boquilla de acero endurecido para el Hotend E3D V6.

    $25.48
    En stock
  • $29.99 Currently, please allow us 1 week for preparation before shipping.
    Nuevo

    Prusament PETG is our own in-house made filament. The whole manufacturing process is closely monitored and tested - we guarantee ±0.02mm precision and highly-consistent colors. You can inspect parameters of every spool we made at prusament.com. Check the sample spool! PETG Prusa Orange is a signature color used on Original Prusa i3 printers.

    $29.99
    Currently, please allow us 1 week for preparation before shipping.
  • $29.99 Currently, please allow us 1 week for preparation before shipping.
    Nuevo

    Prusament PETG is our own in-house made filament. The whole manufacturing process is closely monitored and tested - we guarantee ±0.02mm precision and highly-consistent colors. You can inspect parameters of every spool we made at prusament.com. Check the sample spool! PETG Prusa Orange is a signature color used on Original Prusa i3 printers.

    $29.99
    Currently, please allow us 1 week for preparation before shipping.
  • $24.99 Currently, please allow us 1 week for preparation before shipping.
    Nuevo

    Prusament PLA is our own in-house made filament. The whole manufacturing process is closely monitored and tested - we guarantee ±0.02mm precision and highly-consistent colors. You can inspect parameters of every spool we made at prusament.com.

    $24.99
    Currently, please allow us 1 week for preparation before shipping.
  • $24.99 Currently, please allow us 1 week for preparation before shipping.
    Nuevo

    Prusament PLA is our own in-house made filament. The whole manufacturing process is closely monitored and tested - we guarantee ±0.02mm precision and highly-consistent colors. You can inspect parameters of every spool we made at prusament.com.

    $24.99
    Currently, please allow us 1 week for preparation before shipping.
  • $0.69 En stock
    Nuevo

    This PTFE tube is for hotend compatible with selected Original Prusa i3 printers (see the list below) at 1.75 mm filament diameter. More about PTFE tubes can be found in this article.

    $0.69
    En stock
  • $1,799.00 SPECIAL PRE-ORDER PRICE! Shipping starts in January 2019, new orders in February/March 2019
    Nuevo

    $1,799.00
    SPECIAL PRE-ORDER PRICE! Shipping starts in January 2019, new orders in February/March 2019
  • $2,099.00 SPECIAL PRE-ORDER PRICE! Shipping starts in January 2019, new orders in February/March 2019
    Nuevo

    $2,099.00
    SPECIAL PRE-ORDER PRICE! Shipping starts in January 2019, new orders in February/March 2019
  • $699.00 PRE-ORDER! Shipping starts in January 2019, new orders in March 2019.
    Nuevo

    Original Prusa Curing and Washing Machine is a separate accessory the for Original Prusa SL1 3D printer. After printing an object from resin, it is highly recommended to wash it in isopropylalcohol and cure the surface using UV light. This 2-in-1 device takes care of both tasks. You can buy it seperately or in a special bundle (save $200) with assembled...

    $699.00
    PRE-ORDER! Shipping starts in January 2019, new orders in March 2019.
  • $1,299.00 $1,399.00 SPECIAL PRE-ORDER PRICE! Shipping starts in January 2019, new orders in February/March 2019
    Nuevo

    Original Prusa SL1 3D printer is based on the MSLA printing process. Unlike Original Prusa i3 machines, this printer uses a high-resolution LCD panel and a UV LED to cure thin layers of resin to achieve an unprecedented level of detail. This is a DIY kit. If you're looking for fully assambled printer, you can find it here. You can also buy a bundle of...

    $1,299.00 $1,399.00
    ¡Precio rebajado!
    SPECIAL PRE-ORDER PRICE! Shipping starts in January 2019, new orders in February/March 2019
  • $24.99 Agotado
    Nuevo

    Prusament PLA is our own in-house made filament. The whole manufacturing process is closely monitored and tested. We guarantee ±0.02mm precision for the vast majority of materials (±0.03 mm for blended materials), and highly-consistent colors. You can inspect parameters of every spool we made at prusament.com. Check the sample spool! Ms. Pink Blend is a...

    $24.99
    Añadir al carrito Más
    Agotado
  • $1,599.00 $1,699.00 SPECIAL PRE-ORDER PRICE! Shipping for beta testers starts in December 2018, new orders in February/March 2019
    Nuevo

    Original Prusa SL1 3D printer is based on the MSLA printing process. Unlike Original Prusa i3 machines, this printer uses a high-resolution LCD panel and a UV LED to cure thin layers of resin to achieve an unprecedented level of detail. This is a fully assembled printer. If you're looking for DIY KIT, you can find it here. You can also buy a bundle of...

    $1,599.00 $1,699.00
    ¡Precio rebajado!
    SPECIAL PRE-ORDER PRICE! Shipping for beta testers starts in December 2018, new orders in February/March 2019
  • $24.99 Currently, please allow us 1 week for preparation before shipping.
    Nuevo

    Prusament PLA is our own in-house made filament. The whole manufacturing process is closely monitored and tested - we guarantee ±0.02mm precision and highly-consistent colors. You can inspect parameters of every spool we made at prusament.com. I’m the ocean, I’m the sky, I’m Prusament Azure Blue…

    $24.99
    Currently, please allow us 1 week for preparation before shipping.

Síguenos en Facebook

  • Hay existencia de todo

    Tenemos existencia de todos nuestros productos

  • Soporte a la velocidad de la luz 

    Podemos ayudarle con sus problemas de impresión 3D, hemos estado trabajando con impresión 3D por 9 años. 

  • Pago fácil

    Aceptamos todas las tarjetas más utilizadas. 

Acerca de nosotros

Esta tienda electrónica manejada por Prusa Research s.r.o., compañía fundada por Josef Průša, uno de los desarrolladores clave de RepRap.

Estamos desarrollando impresoras 3D que sean fáciles de usar y rentables desde 2009. Prusa i3 es una de las impresoras 3D más usadas en el planeta. 

Puede descubrir más información sobre nuestra compañía en www.prusa3d.es.